DJI T70P Atomization Centrifrugal Sprinkler

£450.00

Precision centrifugal atomisation system
Produces consistent droplet sizes
Optimised for DJI Agras T70P
Supports accurate chemical application
Built for professional spraying operations

Category: DJI Agras T70

DJI Agras T70P Dual Atomization Centrifugal Sprinkler

The DJI Agras T70P Dual Atomization Centrifugal Sprinkler is an ultra-high-flow, precision-engineered chemical delivery system built exclusively to match the demanding agricultural workloads of the Agras T70P platform. Driven by robust, high-RPM dual centrifugal motors, this system utilizes extreme rotational energy rather than raw line pressure to cleanly break down liquids into highly uniform droplet configurations. The standard dual-sprinkler layout unleashes an impressive maximum flow rate of 30 L/min, drastically maximizing acreage speed and downward canopy penetration.

30 L/min Standard Flow (Up to 40 L/min)
50 – 500 μm Adjustable Droplets
Integrated Liquid Heat-Sync Path
Magnetic Drive Impeller Pumps
Agras T70P / T100 Native Fit

Innovative Heat-Sync Architecture & Fluid Control

To manage the thermal loads generated during high-flow field operations, the T70P sprinkler features an advanced internal design matrix. The chemical flow profile doubles as a cooling pathway, utilizing the incoming liquid spray to continuously pull heat away from the dual centrifugal electric motors. This structural integration significantly lowers thermal degradation, safeguarding component lifespan across severe seasonal window operations.

Magnetic Drive Impeller Pumps: Massive, isolated liquid transport chamber delivers high flow metrics while minimizing internal motor wear.
Solenoid Shut-Off Valves: Instantaneous liquid command completely eliminates chemical dripping or leaking on field turns.
Continuous Electromagnetic Flow Meter: Non-contact dual-channel scanning offers real-time telemetry control to eliminate striping patterns.

Adjustable Micron Range & Orchard Adaptability

The system’s high-speed rotating atomization disks provide infinite dynamic droplet scaling between 50 and 500 μm, matching any application requirement smoothly. Operators can transition instantly from wide-scale field drift management to targeted orchard canopy penetration.

Standard Dual Assembly: Spreading standard 4–11 meter wide swathes at flight speeds up to 20 m/s.
Optional Orchard Upgrade: Supports a 4-sprinkler configuration that scaling delivery up to 40 L/min for a 65% boost in underside canopy leaf coverage.
Rigid Lower Disc Shrouds: Native DJI factory-engineered lower disks optimize under-boom downwash airflow to minimize mist drift.

Close up view of the centrifugal disk setup, spray cover guard, and chemical line input

Atomization & Thermal Performance

Liquid Integration

Thermal-Duct Cooling

Channels active chemical flow around the centrifugal housings to continuously bleed off excess motor heat.

Droplet Consistency

Centrifugal Force Atomization

Suppresses striping by flinging mixture evenly out of precision-balanced rotational plates.

Technical Specifications

Centrifugal Sprinkler System Specifications
Sprinkler Model	LX07550SX (Standard) / LX09550SX (Optional Mist Nozzle)
Droplet Particle Size	50 – 500 μm (Fully controllable variable spectrum)
System Max Flow Rate	30 L/min (Standard 2-Nozzle setup) / 40 L/min (Optional 4-Nozzle Orchard setup)
Effective Spray Width	4 – 11 meters
Pump Infrastructure	Dual Magnetic Drive Impeller Pumps (Corrosion-Resistant Matrix)
Platform Compatibility	DJI Agras T70P & Agras T100 commercial platforms exclusively

Maintain precise, leak-free spray cycles. Contact the Drone Sales UK commercial team today for genuine factory replacement disks, mist kits, and complete boom assemblies.

Enquire About T70P Sprinkler Components

How does the T70P centrifugal sprinkler prevent clogging?›

Traditional pressure nozzles feature microscopic orifices that easily choke on thick, viscous chemicals or powder suspensions. The T70P sprinkler avoids this by using an open, high-speed spinning atomizing disk. Centrifugal force flings the liquid outward across the spinning edge, making it virtually impossible for particulates, powder mixes, or sediment to cause a blockage during operation.

Can I adjust the droplet size for different chemical applications?›

Yes, completely on the fly. Through the DJI RC Plus controller, you can dynamically alter the rotation speed of the sprinkler disk to adjust droplet sizes between 50 and 500 micromitres. This allows you to deploy fine mists for dense foliage penetration or coarser, heavier droplets to combat drift on windy days.

What is the maximum flow rate of the T70P sprinkler system?›

Equipped with dual heavy-duty magnetic-drive impeller pumps, the standard dual-sprinkler array puts out a maximum flow rate of 30 litres per minute (L/min). For ultra-high-volume orchard spraying, operators can install an optional four-sprinkler expansion kit to boost the system’s total output up to a massive 40 L/min.

How does the new “Drip-Proof” valve system work?›

The T70P atomization assembly incorporates an updated centrifugal sealing valve mechanism. The moment spraying is toggled off in the app or the drone slows down for a turn, the mechanical valves instantly snap shut. This completely eliminates chemical dripping or trailing, protecting your headlands from accidental over-application or crop scorching.

Are these sprinklers compatible with older Agras drones?›

No. The T70P atomizing sprinkler relies on upgraded high-voltage power lines and specific mounting architectures designed exclusively for the Agras T70P and T100 platforms. It cannot be retrofitted or plugged into older T40 or T30 motor arms due to different communication protocols and electrical couplings.

What is the best way to clean and maintain the centrifugal assembly?›

Crucial Daily Maintenance: At the end of every spraying window, flush the system thoroughly by running clean water through the pumps and spinning the disks for 2 to 3 minutes. This removes chemical crusts. Periodically check the spinning disc edges for wear, pitting, or chemical scoring, as an unbalanced or damaged disc will cause motor vibrations.

Can Drone Sales UK supply individual replacement sprinklers and discs?›

Yes. Drone Sales UK carries a full inventory of genuine DJI enterprise parts. We supply complete replacement T70P centrifugal sprinkler units, individual replacement atomization discs, sealing valves, and magnetic pump couplers to ensure your team experiences zero downtime during critical spraying windows.

DJI AGRAS T70P Dual Atomizing Sprinkler · Dual Centrifugal Disc Design · Adjustable Droplet Size (50–500 μm) · 40 L/min Maximum Flow Rate (4-Sprinkler Setup) · Brushless Direct-Drive Motor · Instantaneous Pressure-Leakproof Shutoff Valve · High-Durability Ceramic Components · Anti-Clogging Geometry

DJI AGRAS T70P Atomization Centrifugal Sprinkler — Key Specifications

The precision fluid delivery powerhouse engineered for the heavy duty DJI Agras T70P platform. Utilizing dual state centrifugal atomization technology, these sprinklers provide uniform droplet sizing and extreme penetration through dense crop canopies, eliminating standard nozzle blockages while working in perfect harmony with the drone’s high output magnetic drive impeller pumps.

Centrifugal Atomization Technology
50 – 500 μm Adjustable Droplets
Up to 40 L/min Maximum Flow Rate
Blockage-Free Internal Channels
4 – 11 m Effective Spray Width
Dual or Quad Nozzle Array Support

Technical Models & Spray Performance

Official Hardware Models: LX07550SX (Standard High Efficiency Centrifugal Sprinkler) / LX09550SX (Optional Specialized Mist Nozzle)
Installation Quantity Support: 2 sprinklers equipped standard (rear mounting position) | Supports expansion up to 4 optional sprinklers for maximum field saturation
Physical Array Spacing: 1874 mm fixed installation distance between the primary rear nozzles to maximize wind-gilded chemical distribution
Droplet Sizing Control: Dynamically adjustable between 50 μm and 500 μm via real time spinning disc speed modifications directly inside the DJI Agriculture App
Effective Swath Width: 4 meters to 11 meters maximum coverage span per pass, depending on aircraft altitude, flight velocity, and ambient crop canopy thickness

Fluid Integration & Mechanical Durability

Bulk Liquid Throughput: Sustains continuous high pressure flow rates of 30 L/min using the standard dual configuration, and up to 40 L/min when utilizing the expanded four sprinkler array
Pump Cohesion: Directly plumbed into the dual magnetic drive impeller pump channels for immediate electronic shutoff, eliminating structural chemical dripping post spray line commands
Anti-Clogging Design: Centrifugal spinning mechanics eliminate traditional narrow spray orifices, allowing smooth application of thick powder suspensions and organic biological treatments without line constraints
Chemical Shielding: Internal components are built with extreme anti-corrosion materials to prevent degradation from heavy liquid fertilizers, systemic pesticides, and ambient field environments across a 0 °C to 40 °C thermal range

* Droplet size configuration should be matched carefully with chemical manufacturer label guidelines. Smaller droplets (below 150 μm) provide excellent foliage penetration but increase the risk of atmospheric drift in ambient winds exceeding 6 m/s. Always clear out the centrifugal plumbing lines by flushing the entire assembly with fresh water at the conclusion of every spray operation.