DJI Zenmuse H30T

The H30T integrates five modules: a wide‑angle camera, a zoom camera, an infrared thermal camera, a laser rangefinder and an NIR (near‑infrared) auxiliary light.

Wide‑angle: 48 MP, 1/1.3″ CMOS, DFOV ~82.1° (supports 4K@30 fps).

Zoom: 40 MP, up to 34× optical and up to 400× digital zoom.

Thermal: 1280×1024 (radiometric), supports up to 32× digital zoom, temperature measurement up to ~1600 °C with filter.

Laser Rangefinder: Range from 3 m to 3000 m.

NIR Light: 850 nm illumination to assist night imaging.

The H30T has dimensions approx. 170 × 145 × 165 mm and weighs around 920 ±5 g. Its power consumption is about 28 W under nominal operation.

The H30T supports an IP54 protection rating (under controlled lab conditions). It operates in temperatures from –20 °C to +50 °C and can be stored from –20 °C to +60 °C.

The H30T is compatible with the DJI Matrice 300 RTK and Matrice 350 RTK platforms (with DJI RC Plus controller required for some setups).

The 3‑axis gimbal offers angular vibration stability around ±0.002° in hover and ±0.004° in flight. The controllable tilt range is –120° to +60°, with pan ±320°.

With the IR density filter installed, the thermal camera can measure up to about 1600 °C. Multiple gain modes support detection of small temperature differences or wide temperature ranges.

Yes — it supports Link Zoom, allowing the visible (zoom) camera and thermal camera to zoom in sync, maintaining aligned fields of view for both sensors.

Yes — the unit features a Night Scene mode, full‑colour night imaging, an IR filter toggle for black‑and‑white night view, and NIR illumination support to enhance performance in low light.

The laser rangefinder measures from approximately 3 m to 3000 m. Accuracy is ±(0.2 m + distance × 0.15 %) for distances under 500 m, and ±1.0 m for distances beyond 500 m.

The device must be activated through DJI Pilot 2 before first use. For care: store in a dry environment ( also avoid laser/bright solar directing > 800 °C). After powering off wait at least 30 seconds before turning on again.

While the unit is rated at IP54 in lab conditions, sustained wear, exposure or damage may degrade protection over time. Avoid moisture ingress in ports or on lenses.

Features include Smart Capture, pre‑record, foreground stabilisation, electronic dehazing, AI‑assisted subject tracking, high‑resolution photo grid modes, and seamless integration with DJI’s enterprise ecosystem.