Zenmuse H30

The H30 includes four integrated modules: a wide-angle camera, a zoom camera, a laser rangefinder, and an NIR (near-infrared) auxiliary light. :contentReference[oaicite:0]{index=0}

The zoom camera has a 1/1.8-inch CMOS sensor, 40 MP effective pixels, and supports **34× optical zoom** with up to **400× digital/hybrid zoom**. :contentReference[oaicite:1]{index=1}

The wide-angle camera is 48 MP, 1/1.3-inch CMOS, with an equivalent focal length of 24 mm and DFOV ~82.1°. :contentReference[oaicite:2]{index=2}

It measures from **3 m to 3000 m**. For ≤ 500 m the accuracy is ±(0.2 m + distance × 0.15%), and beyond 500 m ~±1 m. :contentReference[oaicite:3]{index=3}

The payload weighs ~920 ± 5 g and its dimensions are 170 × 145 × 165 mm. Power consumption for the H30 model is about 26 W. :contentReference[oaicite:4]{index=4}

Under controlled conditions, it attains **IP54** (dust/splash resistance). :contentReference[oaicite:5]{index=5} Operating range: –20 °C to +50 °C; storage up to +60 °C. :contentReference[oaicite:6]{index=6}

The H30 has a 3-axis gimbal (tilt, roll, pan). Angular vibration stability is ±0.002° in hover and ±0.004° in flight. :contentReference[oaicite:7]{index=7} Tilt control range: –120° to +60°; pan ±320°. :contentReference[oaicite:8]{index=8} Mechanical limits are wider (tilt to –132.5°, pan ±328°) but control is within the above ranges. :contentReference[oaicite:9]{index=9}

The H30 is compatible with DJI Matrice 300 RTK (requires DJI RC Plus) and Matrice 350 RTK. :contentReference[oaicite:10]{index=10}

Yes. It supports **Night Scene mode** for both the zoom and wide-angle cameras. It also uses the NIR auxiliary light to improve visibility in darkness. :contentReference[oaicite:11]{index=11}

The H30 is primarily designed for inspection, surveillance, and observation rather than high-precision mapping. Some lower-accuracy mapping might be possible, but it’s not its main strength. :contentReference[oaicite:12]{index=12}

Features include **Smart Capture**, **electronic dehazing**, **pre-record**, **foreground stabilization**, **AI spot check**, and integration with DJI’s enterprise ecosystem. :contentReference[oaicite:13]{index=13}

You must activate the H30 via DJI Pilot 2 before first use. :contentReference[oaicite:14]{index=14} Store in low humidity (< 40 %) when idle, avoid direct sun or heat sources, and wait at least 30 s between power on/off cycles. :contentReference[oaicite:15]{index=15}