Waterproof Falconry Drone +

The Falconry Drone is widely used by falconers to enhance training. By flying a lure at specific altitudes, falconers can encourage their falcons to chase and catch it, promoting higher flight, strength building, and overall conditioning.

Equipped with a Payload Release Mechanism, the Falconry Drone can carry up to 2 kg, allowing it to bring a falcon down to a desired height and release the parachute close to the ground. The payload release is easily controlled via the remote.

Additionally, a Trollsafe device can be attached, which automatically releases the lure when a set tension threshold is reached.

This Falconry edition can reach altitudes of up to 500 meters; however, always ensure compliance with local regulations.

Prepare Insert the FD1+ battery and attach the propellers. Power on both the drone and the remote controller.	Setup Set up your lure and secure to the drone’s release mechanism.	Launch Launch the FD1+ and navigate it to your selected fishing location by following the coordinates on the controller.

Deploy Flick a switch on your controller to open the release mechanism, dropping your bait.	Return Tap the home button and the drone will automatically return to the shore.

 

4.8 LBS / 2.2KG Bait Capacity

The upgraded propulsion system of the new FD1+ offers greater power and efficiency compared to its predecessor, enabling the drone to effortlessly lift weights up to 2.2 kg.

High Torque Motors

The FD1+ features four brushless motors with a low KV rating, providing high torque to generate the thrust needed to carry heavy baits.

Smooth Control ESCs

The FD1+ incorporates sine wave ESCs, ensuring smooth and gradual motor acceleration, which enhances stability when lifting heavier loads. These ESCs offer precise control, allowing for fine maneuvering and stable hovering—crucial when positioning baits at exact GPS coordinates.

	Slide In Battery Replacing the FD1+ battery is quick and easy. Just open the hatch, slide the battery into place, press the power button, and you’re ready to go! The hatch features a rubber seal, making it fully watertight to keep everything dry once closed.
Screw On Propellers The FD1+ propellers feature a threaded design for easy installation, ensuring they stay securely fastened during high-thrust operations when the motors are running at high speeds.

I67 Saltwater Proof

The FD1+ aircraft is fully sealed, air-pressure tested, and dunk tested to ensure it is completely waterproof. Its fuselage is constructed from marine-grade ABS, providing extra strength and resistance to distortion.

Corrosion Free

The FD1+ features waterproof motors, a waterproof bait release, and internal electronics, all coated with a corrosion-resistant layer for added protection against salty air.

S6 Flight Controller

The upgraded S6 flight controller enhances responsiveness by making real-time adjustments to maintain the FD1+’s altitude and balance, ensuring stable performance even when carrying heavy baits.

Self Calibrating

With the S6 flight controller, anglers can quickly deploy the FD1+ for fishing without the need for a complex calibration process. The FD1+ automatically calibrates its sensors to ensure stability and control during flight.

Buoyant Design

The FD1+ is designed with enough buoyancy to float on water, allowing it to remain afloat upon landing and take off again with ease.

GPS 9.0

The latest 9th-gen GPS, with enhanced satellite connectivity, offers exceptional precision and stability when guiding the FD1+ to a specific fishing spot. The drone will hold its position and maintain its course, even in windy conditions.

High Voltage Batteries

The FD1+ is equipped with a high-voltage LiHV 6S battery designed to enhance its lifting capacity. With an excellent power-to-weight ratio, this flight battery allows the drone to carry heavy baits while maintaining flight stability, and provides enough thrust to perform reliably in challenging conditions, such as strong winds.

Cruise Mode

Cruise mode allows the FD1+ to fly at a consistent speed and direction automatically, making long-distance drone casting effortless. This frees anglers from continuously adjusting the drone, allowing them to concentrate more on fishing.

Automatic Return Home

When the FD1+ is out of sight, a single button press will automatically return the drone to its take-off point. This auto-return feature is also activated in emergencies, such as low battery or signal loss.

Enhanced Wind Resistance

Equipped with a powerful propulsion system and precise GPS 9.0 technology, the FD1+ can maintain its position and stability even in winds up to 32 mph (28 knots).

Automatic Flip

Should the fishing drone inadvertently flip over in the water, the joysticks can be utilized to right it, restoring it to its upright orientation, after which you can pilot it safely back to shore.

Spec Sheet

Waterproof Rating:	IP67
Weight:	1578g (Without battery); 2291g (With Battery)
Max Take-Off Weight:	4491g
Size (W/O Propeller):	628*628*218mm (With propellers); 372*372*202mm (Without propellers)
Max Ascent Speed:	3m/s
Max Descent Speed:	2m/s
Max Flight Speed:	GPS Mode: 10m/s; ATTI Mode: 18m/s (without payload); 14m/s (With max payload)
Max Tilt Angle:	30°
Max Altitude From Takeoff Point:	120m (default)
Max Flight Distance:	1300m
Max Image Transmission Distance:	1300m
Max Payload Capacity:	2200g (4.8lb)
Max Wind Speed Resistance:	18m/s
Max Flight Time (Hovering):	27 mins (no wind & no load)
Hovering Precision:	±0.5m
Working Temperature:	14℉ ~ 104℉ / -10℃ ~ 40℃
Satellite Positioning Systems:	GPS + Galileo + BeiDou
Certifications:	CE/FCC/ROHS/RCM