DJI C8000 Intelligent Battery Station

DJI C8000 Intelligent Battery Station

£1,415.00

Category:

DJI C8000 Intelligent Battery Station (UK) — Fast Field Charging for Agras

The DJI C8000 Intelligent Battery Station is a high-power, dual-channel charger designed for
DJI Agras batteries (DB2000 / DB800), ideal for T25, T25P, and T50 operations.
Available from Drone Sales UK with UK setup, training, and support.

Key Benefits

  • Dual charging: Charge two Agras batteries at the same time for continuous spraying and spreading.
  • Rapid turnaround: Single-battery fast charge from 0% to as high as ~98% in about 26 minutes (dual charge ~36 minutes), subject to battery model and conditions.
  • High output power: Up to 7,200 W (dual-input) or 3,600 W (single-input); works with standard site generators for field charging.
  • Keeps working: Adaptive thermal management helps maintain charging even when ventilation is reduced (follow DJI safety guidance for airflow).
  • Real-time monitoring: Clear status LEDs and warning indicators on the front panel for instant diagnostics.
  • Comprehensive protection: Built-in safeguards for over-current, over-charge, under-voltage, over-temperature, short-circuit, and fan stall events.
  • User-friendly insights: On-unit status display plus USB-C connection to your remote controller for detailed battery info and error codes in the DJI Agras app.

Tip: Pair the C8000 with a suitable inverter generator for maximum uptime. Our team can advise on
generator sizing and battery rotation to match your workload.

DJI C8000 Intelligent Battery Station — FAQ

How do I activate the DJI C8000 Intelligent Battery Station in the app?

The C8000 requires a one-time activation before first use. A solid green warning LED usually indicates it hasn’t been activated yet. Follow these steps:

  1. Connect power: Plug the C8000 into mains or a suitable generator.
  2. Link to the remote: Use a USB-C (C8000) to USB-A (remote) data cable.
  3. Power on: Switch on the C8000 and the remote controller.
  4. Activate in the app: Open the DJI Agras/aircraft-compatible app on the remote and follow the on-screen prompts to complete activation.

Tip: If activation doesn’t appear, reseat the cable, try another known data-capable cable, or restart both devices.

How do I connect the DJI C8000 to the remote controller and update firmware?

Use the steps below to connect and keep the C8000 up to date:

  1. Connect & power: Plug the C8000 into power and connect it to the remote via USB-C (C8000) to USB-A (remote). Turn on both devices.
  2. Open the app: Launch the DJI Agras/aircraft-compatible app on the remote.
  3. Update: Follow the firmware prompts. Ensure the remote has an active internet connection (Wi-Fi/4G) and keep the cable connected until the update completes.

Note: Do not power off or disconnect during updates. If no prompt appears, check your network, cable, and try restarting the app.

C8000 Intelligent Battery Station — Key Specifications

  • Model: CHX101-7000
  • AC input range: 90–264 V AC
  • DC output voltage: 42–59.92 V DC
  • Maximum output power: up to 7,200 W (dual-input) / 3,600 W (single-input)
  • Output channels: 2 independent charge ports
  • Protection features: integrated safeguards for over-temperature, over-voltage, under-voltage, short-circuit, fan stall, and related fault conditions
  • Operating temperature: −20 °C to 45 °C
  • Charging safety: connector protection to help prevent mis-connection and enhance charge security

Note: Actual charge rates depend on power source, ambient temperature, battery state, and configuration.

Related Products